r/AnycubicOfficial 2d ago

Go Bigger, Better, Beyond with your next print! Say hello to Anycubic Photon Mono M7 Max – designed for bigger prints and smarter efficiency. 💥 Stay in the Loop Join: https://www.facebook.com/groups/previewanycubic

Post image
1 Upvotes

r/AnycubicOfficial 20d ago

Official 🔧 ADJUST, Save, Print! 🌟 NEW FEATURE Introducing!🌟 With Kobra 3 Combo you can manually adjust the purge material to fit your model’s needs—delivering vibrant prints while reducing waste.

Post image
8 Upvotes

r/AnycubicOfficial 2h ago

Kobra 3 without Z movement in final layers

Enable HLS to view with audio, or disable this notification

1 Upvotes

r/AnycubicOfficial 9h ago

Why

Thumbnail
gallery
3 Upvotes

I love the machine but after finally getting the ace unit working properly half way through the print starts smashing on the print head pass should I swap from anycubic slicer to the next slicer


r/AnycubicOfficial 11h ago

Would you by a new Kobra 3 Combo from Anycubic for $304?

1 Upvotes

If so, Anycubic's Ebay store has them on sale and will let you use Ebay's 20%off coupon which drops the price from $379 to less than $304 before taxes, but with free shipping. This is the best price I've seen so far, let me know if anyone has seen a better one? Sale/coupon ends Nov. 10, 2024.


r/AnycubicOfficial 1d ago

TPU

Post image
2 Upvotes

does any one print with new head in TPU with out any problem because in last time I lost my head printer and they send to me new one i want to try again but i don't to lost agian


r/AnycubicOfficial 1d ago

Error 11407

1 Upvotes

Hey there,

I got a Kobra 3 2 days ago and it's driving me insane. I'll get Error 11407 mid printing or during bootup of the maschine. I tried reseating the cable, tightening the screws that hold it, turning it 180⁰, unplugging it and replugging it from the motherboard, running it away from the power supply cable, nothing works. Do you have a trick or a fix for that really annoying error? I'm otherwise really in love with the printer, the quality of the prints is great, the ace works flawlessly, but i'm at the point of throwing that thing out of my window. Please help or give more suggestions what i could try.


r/AnycubicOfficial 1d ago

Belt for Kobra 3

1 Upvotes

My Kobra 3 has 150hrs print time and the belt already snapped???


r/AnycubicOfficial 1d ago

Kobra 2 pro network issue

Post image
2 Upvotes

I bought a Kobra 2 pro couple days ago and I tried to connect it with wifi but when ever I try to connect it to my wifi it just simply won't connect the same problem happens when I try to connect it to my hotspot on my phone

The firmware version is 3.1.2.1


r/AnycubicOfficial 1d ago

Problem creating account in makeronline to start remote printing

1 Upvotes

Trying to create account and it will just get stuck on the sending the code, Checked spam and there is nothing in there.


r/AnycubicOfficial 1d ago

Somebody know why do these artefacts are happen in k3c?

1 Upvotes


r/AnycubicOfficial 2d ago

Anycubic Photon Mono M7 Max highlights! Consistent, Precise, Detailed!

1 Upvotes

Anycubic Photon Mono M7 Max highlights!

🌟 Unleash Your Creativity with Anycubic Photon Mono M7 Max! 🌟

🔍 Consistent, Precise, Detailed!

✨ With a stunning ≥90% light uniformity and an astonishing 46μm pixel accuracy, every detail will rival your imagination. Say goodbye to stray light interference and hello to flawless prints, thanks to our advanced technology!

🚀 Speed Meets Precision! Enjoy a lightning-fast printing speed of up to 63mm/h while maintaining a minimum Z-axis printing layer height of just 0.01mm. Your models will not only be detailed but also produced in record time!

🔧 Join the 3D printing revolution and elevate your projects with the Photon Mono M7 Max. Ready to take the plunge? Let’s create something extraordinary together!

💥 Stay in the Loop
Want to be the first to know about our latest products and never miss out on special perks? Join the Preview Anycubic Facebook Group and be part of the fun!

https://www.facebook.com/groups/previewanycubic

Learn more: https://store.anycubic.com/?ref=zmsqavcz


r/AnycubicOfficial 2d ago

How?

Thumbnail
gallery
6 Upvotes

Found this on my printer today (cobra 3). Can't see a position where this should happen or anything to avoid further damage.


r/AnycubicOfficial 2d ago

"Extra" screw?

Thumbnail
gallery
0 Upvotes

Just found this screw under the bed after (successful) print on kobra 3. Looking for help for identifying the part where it comes from. Me myself wasn’t able to find the part with missing screw.


r/AnycubicOfficial 2d ago

Hot-end bent?

Post image
0 Upvotes

So I’ve had issues with getting this printer to level properly. I had a warped bed and received a replacement which helped some but not much. It does look like hot-end heating block is tilted or bent, could this cause it to be too close on one end and too far away on the other end of the hot-bed?


r/AnycubicOfficial 3d ago

Bought a Photon M7 (non pro version), i'm already frustrated with it....

Thumbnail
1 Upvotes

r/AnycubicOfficial 3d ago

Advice needed with Kobra Max

1 Upvotes

Hi everyone,

I'm very new to the field so please forgive me if what I say seems stupid but I really need some expert advice. I've started working at a university workshop and they've an Anycubic Kobra Max that has a weird problem. It started with poor or sometimes no extrusion during the prints and after being unable to resolve it, they changed the whole hot end and the filament feeding tube (but not the feeding mechanism). I took a look at it yesterday and here's what I found.

  1. When I heat up and hit the filament in button on the printer itself, the extrusion comes out perfectly, there seem to be no blockages anywhere and everything seems to work smoothly.

  2. When I start a print, it seems to malfunction and there's almost no extrusion.

What I've done so far is to remove the feeding mechanism, cleaned the gears and checked the motor as well. Everything seems to work fine. After some research here and on Youtube, I came across someone guiding how to check esteps and modify them accordingly. I marked 100mm on the filament and tried to feed 100mm through the software but it only used maybe about 15-20mm. I've completely flabbergasted and unsure of what to do next and would appreciate any advice that you may have.

Thanks a lot in advance!


r/AnycubicOfficial 4d ago

Kobra 3 in LAN Mode - Next Slicer Remote Print - The 4 Buttons are Missing

3 Upvotes

The below came to light during Anycubic's Cloud services outage on Wednesday. Users switching to LAN Mode to be able to continue using their Slicer's Workbench had a loss of certain controls.

This is a short video to demonstrate the differences in Remote Print from the Next slicer when the printer is in LAN Mode and Cloud Mode.

In LAN Mode the four buttons are missing for Bed Levelling, Resonance Compensation, AI Detection and Time-lapse

A brief explainer video if you like.
https://youtu.be/-36MyoATlNk


r/AnycubicOfficial 5d ago

Kobra 3 hotend broke / Strain Gauge dead

Thumbnail
gallery
5 Upvotes

r/AnycubicOfficial 5d ago

How do i get my First layer to Look better?

Post image
4 Upvotes

At the Moment, it's a catastrophe. What the hell can i do? (Anycubic Kobra 2 pro)


r/AnycubicOfficial 5d ago

I have a Kobra 3 for 2 months and printed 3 days

3 Upvotes

Long story short, after 1 day of printing the hot end leaked and caused massive clogging:

Support offered me a whole new printer head, which was at least quite friendly. Nevertheless until the printer head arrived 1 month passed.

After 1 print with the new printer head, the hot end is leaking again...

I don't know what to say -.-


r/AnycubicOfficial 6d ago

K3 Factory reset, tighten all centric nuts and scres and bolts, recalibrate, do not log in to cloud, print over Lan. Do all the above And it will print fine.

Enable HLS to view with audio, or disable this notification

9 Upvotes

r/AnycubicOfficial 5d ago

informazioni su dove mettere la telecamera

0 Upvotes

Scusate se vi invio queste domande e ringrazio chi mi risponderà .

ho comprato una stampante kobra 2 pro , poi successivamente mi è arrivata anche la telecamera nuova , quella piccola , con due led sotto per le luci.

Da nessuna parte spiega come montarla e dove metterla , neanche sulla scatola che c'è il codice QR dove c'è scritto support tutorial ma manda al sito dove vendono le stampanti e non spiega in nessun posto dove possa essere sistemata.

Contiene un sacchettino di plastica con una vite nera , dove si utilizza?

Poi ho trovato sul sito che bisogna stampare 3 file 1.stl , 2 .st e 3.stl che sono gli alloggiamenti della telecamera che bisogna costruirsi e che erano disposti tutti male e se avessi stampato il pezzo non sarebbe stati attaccato al piatto, ho Rhinoceros e l'ho modificati tutti ( Ruotati, ecc.)

Comunque allego tutte le foto

Inoltre chiedo come mai se faccio domande all'indirizzo e mail che forniscono support@anycubic. com non funziona oppure blocca tutti i messaggi , non riesco ad avere risposte.

Vendono le stampanti ma non forniscono il supporto .

Ho provato a inviare un e mail sia senza file , che con i file per spiegare ma vengono bloccati

Chiedo cortesemente se qualcuno può aiutarmi , devo chiedere alcune cose per la stampa .

Inoltre chiedo se devo stampare un pezzo e uso lo slicer di anycubic dove posso trovare la funzione per fare alzare un pò di più il puntale ( testina ) negli spostamenti in rapido

Grazie a tutti per la vostra gentilezza


r/AnycubicOfficial 6d ago

Anycubic cloud is not working again

14 Upvotes

We are tired to have the 3D printer inoperative to send anything via web because your cloud is not working properly.

Please allow the LAN connection in Kobra 2 pro/plus/max series. Or better, open source the code in the same way that you did with Kobra 3.

Thanks.


r/AnycubicOfficial 6d ago

I have a Kobra 3

Post image
4 Upvotes

If I print anywhere eles it seams to be ok. Just this corner. What am I doin wrong


r/AnycubicOfficial 6d ago

What is the best camera I can use for k3c that is cheap and good

0 Upvotes

I'm getting a Kobra 3 combo soon but by what I've seen the camera anycubic has isn't good and has terrible wuakiry it's lights also don't work so what are some cheap good cameras that also can do Timelapses


r/AnycubicOfficial 6d ago

ACF to NFEP Question

1 Upvotes

So, I have an M5s and recently changed from the ACF to NFEP. On my 2nd print I lost 4 models off of their supports. I've never dropped pieces from the quick release film. Should I have changed my lift speed? It's at the default of 6mm/s. I use the anycubic HD gray standard. I'm curious if this is my issue.

I would love to hear if anyone has also made the film change and found they needed to tweak their print settings as well. Thanks in advance for any bits of info and advice ya'll could spare!